切换中文版CHN

当前位置:首页 > News

IS type single stage single suction centrifugal pump performance structure introduction

发布时间:2023-02-16 11:12:00 点击:
Single stage single suction centrifugal pump is the most widely used centrifugal pump in industry and agriculture. Its structure is composed of pump body, pump cover, impeller, impeller nut, shaft, shaft sleeve, bearing suspension, sealing ring, packing ring, ground cover and so on. The general pump cover is fixed on the pump body, the pump body is fixed on the bracket, and the bracket is equipped with a support. The bearings of the shaft are usually lubricated by oil in the bracket, and can also be lubricated by butter. The impeller is cantilever fixed on the pump shaft, so it is called a single stage cantilever centrifugal pump.

The shaft sealing device of this pump mostly uses packing seal. There are also mechanical seals. In the impeller, there is generally a balance hole, or a balance tube to balance the axial forceSingle-stage cantilever centrifugal pump has the

advantages of simple structure, reliable operation, fewer parts, low manufacturing requirements, low noise, small vibration, disassembly coupling, you can take off the whole bearing body rotating parts.


Type IS single stage single suction cantilever centrifugal pump, can be used to transport the temperature does not exceed 80℃ clean water or physical and chemical properties similar to water liquid. It is suitable for industrial and agricultural production.Guangzhou Quanyi Pump Industry has been specialized in pump for more than ten years, and has provided various types of quality pumps and services for 3,000 customers. We recommend GD/FBX/WQG/KTZ/KTB series of products produced by Guangzhou Quanyi Pump industry, with short delivery time and durability.


    文章评论
    内容:
    验证码: